DIY Wipes | Dry Wipes
- Add your own Solvent / Chemical
- Shelf Life: 2 years
- Re-usable Bucket / Canister helps reduce plastic waste
About DIY Dry Wipes
DIY – DRY WIPES are specifically designed for surface cleaning and preparation, where maintaining the integrity of your chemical solution, controlling costs, and improving workplace safety are paramount
Most solvents are “volatile”, i.e. they evaporate into the air very quickly. L-Hygiene DIY-DRY WIPES System slows down the evaporation process – prolonging the life of the chemical & maintaining the amount of active ingredients reaching the surface to near the original concentration level.
Both open bucket and spray bottle systems release more fumes and particulates into the air which can cause workplace safety issues due to chemical absorption through inhalation.
The enclosed L-Hygiene DIY-DRY WIPES* System reduces inhalation risks associated with surface cleaning and preparation, allowing you to maintain control of your specific and changing chemical needs versus pre-saturated wipers, and reduces chemical waste versus open bucket or spray bottle systems, improving cost-in use.
Typical Product Data and Physical Properties of DIY Wipes
- Shelf Life: 2 years
- Safe: Enclosed system helps avoid cross contamination of the wipers and cleaning solution by eliminating re-dipping, which can happen when using open bucket systems.
- Sealed lid helps to reduce staff exposure to chemical VOC’s and spills.
Contents of Dry Wipes
-
06 Nos. of 300 Rolls of dry wipes, Non-woven Polycellulose material. Each 5.9’ x 7.9’ (150 mm x 200 mm)
-
01 No. Pair of pair of Non-disposable Gloves
-
06 Nos. of Hazardous statement label for information to add
-
01 No-500 ml measuring cylinder
-
01 No of 5 Kg Plastic dispenser bucket
Easy to use DIY Wipes
- Versatility of adding your preferred disinfecting solution, allowing you to maintain control over the chemicals you use
- Reduces the need to regularly mix solutions for an open bucket system, and therefore reduces chemical usage and waste
- Portability that makes it easy to take the chemical to the desired point of use
- Re-usable bucket / canister helps reduce plastic waste into the environment
- Helps to reduce chemical waste by providing an accurate chemical load on each wipe
Optimum Application of DIY Wipes
-
Healthcare
-
Industries
-
Education
-
Retail
-
Government Research
Centres & Office Premises -
Hotels and Lodging
Your choice of wiping material can dramatically affect the amount of active agent that actually reaches the surfaces being cleaned.
The DIY-DRY* wiper material in product is suitable for most common industrial solvents, bleach solutions, dilute acids and bases.
The wiper material is suitable for most common industrial solvents, detergents and water-based cleaners.
Enclosed system prolongs the integrity of cleaning solutions to near target levels over longer periods of use.
Ideal for facilities with no laundering capability
DIY - Dry Wipes (Do it Yourself)
Add your own Solvent / Chemical
Typical Uses
- Surface preparation
- Surface cleaning and sanitizing
- Cleaning and removing soil, oil, grease
- Solvent application
- Use on all hard, nonporous surfaces that are outlined on the chemical label
- Bucket can be re-used with a Dry Wipes refill
| Code No. | Packaging |
|---|---|
| DIYNF01NOS | 1 Unit (Box) |
How To Use DRY Wipes
-
1
Insert a dry Wiper roll into the bucket. Fill out the Hazardous statement label with all required information.
-
2
Use Non-disposable gloves while, mixing your preferred solution for surface cleaning, and slowly pour the chemical over the top of the roll using measuring cylinder provided.
-
3
Thread the centre wiper through the lid and close the lid.
-
4
After each use keep the lid tightly closed.